Application
Ozone Generators for Water Treatment
Piped ozone gas for oxidation, disinfection and controlled process-water systems.
Process First
Size the ozone system from water conditions
Water flow alone does not determine the required ozone capacity.
Provide water quality, treatment objective, operating cycle, contacting method and target process indicators. Transfer efficiency and ozone demand influence the generator output required.
Required project data
- Water flow and operating hours
- Source-water analysis and treatment objective
- Target dissolved ozone, ORP or other indicator
- Venturi, diffuser or contact-tank arrangement
- Oxygen or dry-air source
- Off-gas and ambient monitoring plan
Typical System
From feed gas to safe residual-ozone management
Prepare Gas
Supply oxygen or properly filtered and dried air at the specified flow.
Generate Ozone
Control ozone output and cooling within the generator’s operating limits.
Contact Water
Use suitable injection, mixing and contact time for the actual process.
Manage Residual
Monitor the process and safely handle off-gas or excess ozone.
Validation: Treatment performance depends on water chemistry, ozone demand, mass transfer and operating control. Final results must be verified on the actual system.
Specify a water-treatment ozone generator
Send the water flow, analysis, target, feed gas and contact-system information.