Oxygen-Feed Piped-Output Ozone Generators and Core Components
Controlled ozone gas for water, cold storage, ducts, laboratories, agriculture and OEM equipment. Standard platforms, frequently supplied core parts and customer-specific systems from approximately 100 mg/h to 3 kg/h.
For manufacturers, distributors, project companies and overseas ozone-industry partners. This is not an online retail offer.
Parts, complete generators and confidential custom projects
Core Ozone Generator Parts
A major part of our regular supply: enclosed ozone tubes/modules, matched high-voltage power supplies and project-specified component assemblies.
View core parts →Complete Ozone Generators
Piped-output gas sources with defined inlet/outlet connections for air, water and OEM process integration.
View generators →OEM & Custom Systems
Output range, enclosure, controls, voltage, gas path, cooling, labeling and packaging configured for the customer’s machine or project.
OEM capability →Cleaner feed-gas path and more controllable ozone concentration
Reduce nitrogen-derived by-products
Ambient air contains nitrogen. Supplying oxygen minimizes nitrogen entering the electrical-discharge cell and can help reduce nitrogen-oxide by-products compared with untreated air feed.
Support higher ozone concentration
Oxygen feed normally supports higher and more consistent ozone concentration. This matters when gas purity, transfer efficiency or process repeatability is important.
Match the oxygen source, flow control and measurement range
Oxygen supply is selected as part of the ozone system, not as an unrelated product. The correct choice depends on the generator operating point and the process—not only on the oxygen concentrator’s headline flow.
Compact Oxygen Concentrators
For standard smaller and medium systems when the required oxygen flow, purity, pressure and duty cycle fall within a complete concentrator’s operating range.
PSA Oxygen Generator Units
For larger flow, continuous industrial operation or OEM integration where compressor, drying, storage, controls and redundancy must be considered together.
Gas Flow Control
Regulators, valves and flow meters establish the feed condition used to compare ozone mass output and gas concentration.
Gas-phase Ozone Measurement
An analyzer helps verify concentration and output during OEM development, commissioning and process validation.
From compact OEM modules to kg/h industrial systems
Many custom products are exclusive to individual customers and are not displayed publicly. The ranges below are representative project experience, not fixed retail SKUs.
| Representative output class | Example project types | Selection focus |
|---|---|---|
| 100–200 mg/h | SPA, hot-water bath and compact water-equipment integration | Small gas flow, water hydraulics, controls and enclosure space |
| 500 mg/h–1 g/h | Rainwater collection and small treatment equipment | Water flow, storage volume, venturi/diffuser and duty cycle |
| 2–5 g/h | Compact OEM machines and commercial ozone-water systems | Feed gas, concentration, cooling and control range |
| 10, 15, 20, 30, 40 and 50 g/h | Commercial water, air, duct, agricultural and equipment projects | Continuous duty, distribution, gas preparation and interlocks |
| 100 and 200 g/h | Larger industrial process skids and water systems | Cooling, redundancy, service access and off-gas control |
| Custom systems up to about 3 kg/h | High-capacity industrial integration | Modular architecture, oxygen supply, cooling and project documentation |
All output values must be confirmed at an agreed feed gas, gas flow and test condition.
Where a defined ozone-gas outlet is useful
Water & ozone water
Venturi injectors, diffusers, recirculation loops, commercial laundry and OEM washing equipment.
Cold rooms & enclosed spaces
Remote generation and tubing distribution, with oxygen feed for projects sensitive to NOx by-products.
Duct odor control
Accessible generator placement outside greasy process ducts and controlled delivery to injection points.
Laboratories
Adjustable concentration and gas flow for repeatable research apparatus and material tests.
Agriculture
Engineered ozone-gas or ozone-water supply for irrigation, wash, post-harvest and enclosed processes.
OEM commercial equipment
Components and generators matched to customer controls, voltage, gas path, packaging and private label.
Industry experience since 2007, company established in 2015
Application review
We select from process data instead of using a simple room-size or wattage formula.
Component matching
Tube/module, power supply, gas preparation, cooling and control are treated as one system.
OEM confidentiality
Customer-specific products are not automatically published. Public examples represent only part of our completed work.
Send the parameters—receive a configuration review
Useful information includes application, target ozone output/concentration, gas flow, feed gas, pressure/back pressure, water or airflow data, voltage, duty cycle, quantity and OEM requirements.